EMG 48S 36F (With Ni-Cad 4.8V 2000 mAh)

Product Description:
Consisting of module and battery pack designed to fit fluorescent luminaries and convert them to stand by lighting units in case of mains failures. By using this type of battery emergency does not cause blackening to the lamp, so the lamp is more durable.

In the event of a mains failures, the converted luminaries will remain illuminated for the rated duration of 1,5 hours (minimum). The luminaries will resume normal operation and the battery will be recharged upon resumption of the mains supply.
 
The charger/inverter module conforms to:
? Electromagnetic Compatibility Directive (89/336/EEC)"
? And "Low Voltage Directive (73/23/EEC)"
 
Product Features
a. Operate max 36W constant for TLD
Operate max 26W constant for PLC (4 Pin)
Operate max 21W constant for T5
b. Complete with Ni Cad Battery
c. Constant current fluorescent emergency module
d. Duration in emergency mode 1,5 hours
e. Time for full recharge of the battery 24 hours
f. Lumen factor 0,70
 
Spesifikasi:
 
Voltage : AC 180-240 V 50-60 Hz
Current : 0.02 A
Rate power : 2.2 W
Battery charging : 24 hours
Charging current : 200MA
Discharge current : 1.05 ± 0.1 A
Suitable light source : TLD 18~36W - PLC 13~26W - T5 14~21W fluorescent lamps
Battery specification : Ni Cad 4.8V 2000 mAh HT (High temperature)
temperature : -10…+55 °C
Highest surface temperature : 70 °C
LED charge monitoring Test Switch : Switch between emergency and normal lighting function, should have normally open switch